Motor Electrical Protection
• Thermal Overload
Process Caused
(Excessive load)
High Ambient
Conditions (Hot, Blocked Ventilation)
Power Supply
Issues (Voltage/Current Unbalance, Harmonics)
•
Phase Fault
• Ground Fault
• Abnormal Operating Conditions
Over & Under Voltage
Under frequency
Voltage and Current Unbalance
Load Loss
Jamming
Jogging
Thermal over load protection
The tripping time is calculated
according to a simple formula. Pre-stressing is not taken into account because
currents are only recorded if they are greater than 1.1 times the set value.
Negative Sequence Protection
Short Circuit Protection
Testing
Current
Signature Analysis
During this training following points needs to be covered
for condition based-monitoring techniques:
Online
Testing of HT Motors
1.Vibration Signature Analysis (VSA)
2.Motor Current Signature Analysis (MCSA)
3.Acoustic Emission Analysis (AEA)
Residual
Life Assesment (RLA) / Life Expectancy Analysis of HT Motors
1.Polarization Depolarization Current Analysis
2.Non Linear Behavior Analysis
3.Partial Discharge Recording and Analysis
4.Winding Resistance Measurement.
5.Life Expectency Analysis
No comments:
Post a Comment